WoolyPooly
WoolyPooly

Srbminer Crypto Miner. Download Srb miner

Poslední vydání

  • Minor efficiency improvements on algorithm 'pearlhash' for NVIDIA 3000, 4000 and 5000 GPUs

  • Fixes to efficiency fine-tuner

  • Added parameter '--gpu-power-tuner-value'*

  • Default allowed hashrate loss for efficiency fine-tuner is now 3%

  • Bug fixes

Documentation for efficiency fine-tuner : https://github.com/doktor83/SRBMiner-Multi/blob/master/Parameters

After each completed tuning step, SRB reports average hashrate, power and efficiency versus your base OC. An improved step and the final improved winner include an opaque SRB value in square brackets. Copy that value without the brackets to use the measured combination directly:

--gpu-power-tuner-value VALUE --gpu-id 0,2 --gpu-power-tuner-value VALUE_FOR_GPU0,VALUE_FOR_GPU2

One value applies to all selected NVIDIA GPUs. A list follows --gpu-id order; without --gpu-id it follows selected NVIDIA device order. Manual values override --gpu-power-tuner and --gpu-power-tuner-loss. They do not start an automatic scan or load/overwrite its saved winners.

Manual values are independent of OC, algorithm, loss limit...; the target GPU/driver must support the requested controls. Manual values also work with OC configured outside the miner, for example through HiveOS. You do not need to repeat those OC settings in SRB's parameters.

Unlike automatic tuning, manual application does not require a locked core clock. If a GPU fault is attributed to an active manual value, SRB recovers the GPU and suspends that value for this recovery session rather than repeating it indefinitely.

Use manual values at your own risk! A value that was optimal for one OC can make the GPU unstable or crash with a different OC, even on the same GPU.

Custom miner for Hiveos

To use it you need to select “Custom miner” when you create Flight Sheet and paste this into 'Installation url' : https://github.com/doktor83/SRBMiner-Multi/releases/download/3.8.7/srbminer_custom-3.8.7.tar.gz

After that you must set everything manually (--algorithm, --pool, --wallet) through the 'Extra config arguments' field by using parameters. Parameters list here : ( https://github.com/doktor83/SRBMiner-Multi/blob/master/Parameters )

Archive MD5 hashes ff5f70ca61872ab350af3b49ceb028cb *SRBMiner-Multi-3-8-7-win64.zip 7471402c42ae0b347b1eebc731eef6ce SRBMiner-Multi-3-8-7-Linux.tar.gz

Stahování

Srbminer .bat File Examples

SRBMiner-MULTI.exe --disable-cpu --algorithm ethash --pool pool.woolypooly.com:3096 --wallet WALLET_ADDRESS --worker WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --algorithm etchash --pool pool.woolypooly.com:35000 --wallet WALLET_ADDRESS --worker WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --algorithm kawpow --pool pool.woolypooly.com:55555 --wallet WALLET_ADDRESS --worker WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --algorithm kaspa --pool pool.woolypooly.com:3112 --wallet WALLET_ADDRESS.WORKER_NAME --password x

SRBMiner-MULTI.exe --disable-cpu --algorithm sha512_256d_radiant --pool pool.woolypooly.com:3122 --wallet WALLET_ADDRESS.WORKER_NAME

SRBMiner-MULTI.exe --algorithm sha256dt --pool pool.woolypooly.com:3134 --wallet YOUR_WALLET.WORKER_NAME

SRBMiner-MULTI.exe --disable-cpu --algorithm karlsenhash --pool pool.woolypooly.com:3132 --wallet WALLET_ADDRESS.WORKER_NAME

SRBMiner-MULTI.exe --disable-cpu --algorithm verthash --pool pool.woolypooly.com:3102 --wallet WALLET_ADDRESS --worker WORKER_NAME --password c=VTC,zap=VTC!x --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --algorithm firopow --pool pool.woolypooly.com:3104 --wallet WALLET_ADDRESS --worker WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --algorithm autolykos2 --gpu-autolykos2-preload 1 --pool pool.woolypooly.com:3100 --wallet WALLET_ADDRESS --worker WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --algorithm blake3_alephium --pool pool.woolypooly.com:3106 --wallet WALLET_ADDRESS --worker WORKER_NAME --password x

SRBMiner-MULTI.exe --disable-gpu --algorithm ghostrider --pool pool.woolypooly.com:3110 --wallet WALLET_ADDRESS --worker WORKER_NAME

SRBMiner-MULTI.exe --disable-cpu --algorithm autolykos2;blake3_alephium --pool pool.woolypooly.com:3100;pool.woolypooly.com:3106 --wallet WALLET_ADDRESS_ERGO;WALLET_ADDRESS_ALPH --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --algorithm ethash;blake3_alephium --pool pool.woolypooly.com:3096;pool.woolypooly.com:3106 --wallet WALLET_ADDRESS_ETH;WALLET_ADDRESS_ALPH --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --gpu-auto-tune 1 --algorithm ethash --pool pool.woolypooly.com:3096 --wallet WALLET_ADDRESS_ETH.WORKER_NAME --algorithm kaspa --pool pool.woolypooly.com:3112 --wallet WALLET_ADDRESS_KAS.WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --algorithm ethash --pool pool.woolypooly.com:3096 --wallet WALLET_ADDRESS_ETHW.WORKER_NAME --algorithm sha512_256d_radiant --pool pool.woolypooly.com:3122 --wallet WALLET_ADDRESS_RXD.WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --a0-is-zil --multi-algorithm-job-mode 3 --algorithm ethash;ethash --pool POOL_ZIL:ПОРТ;pool.woolypooly.com:3096 --wallet WALLET_ADDRESS_ETH.WALLET_ADDRESS_ZIL.WORKER_NAME_ZIL;WALLET_ADDRESS_ETH --password x;WORKER_NAME_ETH --gpu-boost 3;0

SRBMiner-MULTI.exe --disable-cpu --algorithm etchash --pool pool.woolypooly.com:35000 --wallet WALLET_ADDRESS_ETC.WORKER_NAME --algorithm sha512_256d_radiant --pool pool.woolypooly.com:3122 --wallet WALLET_ADDRESS_RXD.WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --a0-is-zil --multi-algorithm-job-mode 3 --algorithm ethash;autolykos2 --pool POOL_ZIL:ПОРТ;pool.woolypooly.com:3100 --wallet WALLET_ADDRESS_ETH.WALLET_ADDRESS_ZIL.WORKER_NAME_ZIL;WALLET_ADDRESS_ERGO --password x;WORKER_NAME_ERGO --gpu-boost 3;0

SRBMiner-MULTI.exe --disable-cpu --algorithm autolykos2 --pool pool.woolypooly.com:3100 --wallet WALLET_ADDRESS_ERG.WORKER_NAME --algorithm kaspa --pool pool.woolypooly.com:3112 --wallet WALLET_ADDRESS_KAS.WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --algorithm autolykos2 --pool pool.woolypooly.com:3100 --wallet WALLET_ADDRESS_ERG.WORKER_NAME --password x --algorithm sha512_256d_radiant --pool pool.woolypooly.com:3122 --wallet WALLET_ADDRESS_RXD.WORKER_NAME --gpu-boost 3

SRBMiner-MULTI.exe --disable-cpu --a0-is-zil --multi-algorithm-job-mode 3 --algorithm ethash;verthash --pool POOL_ZIL:ПОРТ;pool.woolypooly.com:3102 --wallet WALLET_ADDRESS_ETH.WALLET_ADDRESS_ZIL.WORKER_NAME_ZIL;WALLET_ADDRESS_VTC --password x;WORKER_NAME_VTC --gpu-boost 3;0

Srbminer Crypto Miner Setup

Download the latest Srbminer from the link above. After that, extract the archive and go to the folder with the miner. Select the coin you are interested in for mining and edit the .bat file. If you have not yet chosen what you want to mine, then we recommend that you first go to our mining calculator, where you can specify your video card and get the most profitable coin for the current day. Above you will find ready-made examples of bat files for each coin that you can mine on our pool. You will only have to specify your wallet address and, if desired, the name of the worker (rig).

Miner Basic Commands

The order of parameters is important! Always set --gpu.. and --cpu.. options AFTER --algorithm
--a0-is-zil option used when dual mining ZIL;
- -disable-cpu disable CPU mining;
--disable-gpu disable GPU mining;
--disable-worker-watchdog disabling restart of the miner on error;
--enable-restart-on-rejected automatic restart of the miner with a large number of rejected shares. The number of rejected shares is set by the command --max-rejected-shares;
--gpu-id select video cards that will mine (the id of video cards that you did not indicate they will not mine). The countdown starts from 0. The division is ; or !. For example, --gpu-id 0;1;3. In HiveOS, this parameter is set in the add. configuration;
--gpu-auto-intensity the intensity of video cards. Possible values: 0 - the function is disabled, 1 - light form of intensity, 2 - normal. ; is used as a division; or !. For example, --gpu-auto-intensity 0;1;2. In HiveOS, this parameter is set in the add. configuration;
--tls true enable SSL;
--worker set worker name.

Basic commands for CPU mining

--cpu-threads set the number of CPU threads used for mining;
--cpu-threads-intensity the number of hashes per worker thread, can be 1, 2 or 4. Default 1, separate values with ; and !. For example, --cpu-threads-intensity 1;2;2;3;
--disable-gpu disable mining on video cards.

GPU Temperature Monitor

--gpu-off-temperature turn off the miner when the maximum temperature is reached. You can set your own temperature for each video card. ; is used as a division; or !. For example, --gpu-off-temperature 65;70;60. In HiveOS, this parameter is set in the add. configuration;

Srbminer API

To activate the API, add the --api-enable parameter to the bat file. Below are the commands for working with the API:
--api-port value sets a custom port, the default port is 21550.

Dev Fees

ETH - 0,65%
ETC - 0,65%
RVN - 0,85%
VTC - 1%
Firo - 0,85%
Ergo - 2%
Alph - 1%
RTM - 0,85%
Kaspa - 0,85%

Srbminer not starting

If you have Windows OS and the miner crashes immediately at startup, then add pause to the second line of the miner. Next, start the miner and read the error. After that, double-check your miner settings. If you have HiveOS or any other OS - go to the miner console and look at the logs of what is happening in the miner. After that, double-check your miner settings.