Thợ mỏ BZminer. Tải xuống Bzminer

Bản phát hành mới nhất

Release v20.0.0 of BzMiner. All feedback is welcome ;)

-- What's in this release (v20.0.0)

x Decred: Added pool support x New coin: nexellia x New coin: dint (DinarTether) x New coin: Larissa

--- Dynex Notes ---

  • Fine tuning dynex_pow_ratio will likely give you better results than default settings
  • intensity option will adjust how much vram is allowed to be used
  • Intel ARC support still only for POW

-- dynex_pow_ratio -- Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

  • This is an array of values, one for each gpu

  • In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

  • In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

  • In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

  • A value of 0.0 will mine ONLY POUW

  • A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

  • A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

  • A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

  • A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

  • A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity -- The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

https://www.bzminer.com/releases/v20.0.0/

-- Known Issues

  • AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
  • Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
  • If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
  • Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
  • If Nvidia memory temps are not showing, please update to latest nvidia driver
  • Nexa is not working on Intel currently

NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner

Minerstat update command:

export version="20.0.0"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

MMPOS Update Command

export version="20.0.0" # Example version
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; agent-stop; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/; agent-start

Hive OS Update Command (assuming currently on v19.3.1)

wget https://bzminer.com/downloads/bzminer_v20.0.0_linux.tar.gz; tar -xvf bzminer_v20.0.0_linux.tar.gz; miner stop; cp bzminer_v20.0.0_linux/bzminer /hive/miners/bzminer/19.3.1/; miner start

Rave OS Update Command (assuming currently on v19.3.1)

stop && wget https://bzminer.com/downloads/bzminer_v20.0.0_linux.tar.gz && tar -xvf bzminer_v20.0.0_linux.tar.gz && cp -adpR bzminer_v20.0.0_linux/bzminer /app-data/miners/bzminer-19.3.1 && start

Checksums

bzminer_v20.0.0_windows.zip:

MD5: 706c8c55ad195174f7779f35abf8570e SHA256: 4590c90ac8387cfd25b2c71f59c6adbc9e8965f2b81d682eda39b1ddb046e09b

bzminer_v20.0.0_linux.tar.gz:

MD5: 36090d2d79259e796fef7070065b62ce SHA256: 37a7ce966f47f8b5bc4c82243953b6e8b748b611a04add16a00b88e3de02e5dc

Tải xuống

Ví dụ về tệp .bat Bzminer

EthereumPOW (ETHW)

bzminer.exe -a ethw -w WALLET_ADDRESS.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3096

Ethereum Classic (ETC)

bzminer.exe -a etchash -w WALLET_ADDRESS.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:35000

Kaspa (KAS)

bzminer.exe -a kaspa -w WALLET_ADDRESS.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3112

Ergo (ERG)

bzminer.exe -a ergo -w WALLET_ADDRESS.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3100

NEXA

bzminer.exe -a nexa -w WALLET_ADDRESS.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3124

Ravencoin (RVN)

bzminer.exe -a kawpow -w WALLET_ADDRESS.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:55555

Meowcoin (MEWC)

bzminer.exe -a meowcoin -w WALLET_ADDRESS.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3116

Alephium (ALPH)

bzminer.exe -a alph -w WALLET_ADDRESS.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3106

Radiant (RXD)

bzminer.exe -a radiant -w WALLET_ADDRESS.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3122

EthereumPOW + Alephium Dual Mining

bzminer.exe -a ethw -w WALLET_ADDRESS_ETHW.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3096 --a2 alph --w2 WALLET_ADDRESS_ALPH.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3106

Ethereum Classic + Alephium Dual Mining

bzminer -a etchash -w WALLET_ADDRESS_ETC.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:35000 --a2 alph --w2 WALLET_ADDRESS_ALPH.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3106

EthereumPOW + Alephium + ZIL Triple Mining

bzminer -a ethw -w WALLET_ADDRESS_ETHW.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3096 --a2 alph --w2 WALLET_ADDRESS_ALPH.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3106 --a3 zil --w3 WALLET_ADDRESS_ZIL.WORKER_NAME --p3 zmp://ZIL_POOL

Ethereum Classic + Alephium + ZIL Triple Mining

bzminer -a etchash -w WALLET_ADDRESS_ETC.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:35000 --a2 alph --w2 WALLET_ADDRESS_ALPH.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3106 --a3 zil --w3 WALLET_ADDRESS_ZIL.WORKER_NAME --p3 zmp://ZIL_POOL

EthereumPOW + Kaspa Dual Mining

bzminer -a ethw -w WALLET_ADDRESS_ETHW.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3096 --a2 kaspa --w2 WALLET_ADDRESS_KAS.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3112

Ethereum Classic + Kaspa Dual Mining

bzminer -a etchash -w WALLET_ADDRESS_ETC.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:35000 --a2 kaspa --w2 WALLET_ADDRESS_KAS.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3112

EthereumPOW + Kaspa + ZIL Triple Mining

bzminer -a ethw -w WALLET_ADDRESS_ETHW.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3096 --a2 kaspa --w2 WALLET_ADDRESS_KAS.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3112 --a3 zil --w3 WALLET_ADDRESS_ZIL.WORKER_NAME --p3 zmp://ZIL_POOL

Ethereum Classic + Kaspa + ZIL Triple Mining

bzminer -a etchash -w WALLET_ADDRESS_ETC.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:35000 --a2 kaspa --w2 WALLET_ADDRESS_KAS.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3112 --a3 zil --w3 WALLET_ADDRESS_ZIL.WORKER_NAME --p3 zmp://ZIL_POOL

EthereumPOW + Radiant Dual Mining

bzminer -a ethw -w WALLET_ADDRESS_ETHW.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3096 --a2 radiant --w2 WALLET_ADDRESS_RXD.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3122

Ethereum Classic + Radiant Dual Mining

bzminer -a etchash -w WALLET_ADDRESS_ETC.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:35000 --a2 radiant --w2 WALLET_ADDRESS_RXD.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3122

EthereumPOW + Radiant + ZIL Triple Mining

bzminer -a ethw -w WALLET_ADDRESS_ETHW.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:3096 --a2 radiant --w2 WALLET_ADDRESS_RXD.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3122 --a3 zil --w3 WALLET_ADDRESS_ZIL.WORKER_NAME --p3 zmp://ZIL_POOL

Ethereum Classic + Radiant + ZIL Triple Mining

bzminer -a etchash -w WALLET_ADDRESS_ETC.WORKER_NAME -p stratum+tcp://pool.woolypooly.com:35000 --a2 radiant --w2 WALLET_ADDRESS_RXD.WORKER_NAME --p2 stratum+tcp://pool.woolypooly.com:3122 --a3 zil --w3 WALLET_ADDRESS_ZIL.WORKER_NAME --p3 zmp://ZIL_POOL

Thiết lập Bzminer

Tải xuống trình khai thác Bzminer mới nhất từ ​​liên kết ở trên. Sau đó, giải nén kho lưu trữ và chuyển đến thư mục có trình khai thác. Chọn đồng tiền bạn quan tâm để khai thác và chỉnh sửa tệp .bat. Nếu bạn vẫn chưa chọn thứ mình muốn khai thác, thì trước tiên chúng tôi khuyên bạn nên truy cập máy tính khai thác, nơi bạn có thể chỉ định thẻ video của mình và nhận được đồng tiền sinh lời cao nhất cho ngày hiện tại. Ở trên, bạn sẽ tìm thấy các ví dụ làm sẵn về tệp dơi cho mỗi đồng tiền mà bạn có thể khai thác trên nhóm của chúng tôi. Bạn sẽ chỉ phải xác định địa chỉ ví của mình và nếu muốn, tên của công nhân (giàn khoan).

Bz miner không bắt đầu

Nếu bạn có Hệ điều hành Windows và trình khai thác gặp sự cố ngay lập tức khi khởi động, hãy thêm tạm dừng vào dòng thứ hai của trình khai thác. Tiếp theo, khởi động trình khai thác và đọc lỗi. Sau đó, hãy kiểm tra kỹ cài đặt công cụ khai thác của bạn. Nếu bạn có HiveOS hoặc bất kỳ hệ điều hành nào khác - hãy truy cập bảng điều khiển dành cho người khai thác và xem nhật ký những gì đang xảy ra trong trình khai thác. Sau đó, hãy kiểm tra kỹ cài đặt công cụ khai thác của bạn.